3M 7010511426 43"x103" 466UZ P180 F-weight Sanding Belt ** BOX OF 5EA **

Description

3M 7010511426 43"x103" 466UZ P180 F-weight Sine-lok, Full-flex Sanding Belt
** BOX OF 5EA **
51125 53338
60-0003-2311-7
CY998767339
Details
F-weight, Fullflex heavy paper backing provides durability and smooth operation in either direction
Anti-static treatment helps manage dust and loading
Sine wave splice prevents hinging in splice area, resists fatigue, and minimizes chatter marks
Silicon carbide abrasive produces finer finish than aluminum oxide
Semi-closed coat construction produces finer finish than open coat abrasives
3M™ Paper Belt 466UZ is a smooth running belt constructed with silicon carbide mineral, bonded to an F-weight paper backing. The semi-closed coat construction efficiently sands and finishes flat surfaces in woodworking applications. F-weight is one of the heaviest, most durable paper backings available and will achieve finer finishes than cloth backed belts in the same grade.
The paper backing provides smooth operation and durability. The abrasive side features a semi-closed coat structure that provides greater grain density to achieve finer finishes than open coat belts. This belt also features our dust management technology that reduces static charge in the dust particles, allowing them to be pulled away when coupled with an efficient dust collection system.
To help provide your desired finishing results, the belt ends are joined using a sine wave splice that promotes belt strength and resists hinging and splice fatigue. The splice travels smoothly over contact wheels and platens, minimizes chatter marks, and promotes smooth operation in either direction for consistent finishing results.
Our 3M™ Paper Belt 466UZ uses silicon carbide, a synthetic mineral that is very sharp and commonly used for low pressure applications such as final finishing in whitewood sanding. While it breaks down faster than aluminum oxide, it produces a superior finish.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.